24 Volt 2.0 Amp 2.1 mm ID Coaxial Battery Charger

Our 24 volt 2.0 amp coaxial charger has an output of 1.6 amps, which is the recommended output charge rate for batteries up to size 18 amp hour. The 2.1 mm coaxial connector is sometimes referred to as "barrel plug" due to its cylindrical shape.

For added safety, this charger has an LED green and red light indicating battery charge status, as well as automatic shut-off when charging is complete.

For longer life of your scooter charger, please handle it carefully and store in a safe, dry location when not in use. As electric scooters are predominantly used outdoors, many times the delicate electronics of these types of electric scooter charger cannot withstand a drop on concrete or asphalt.

Note This charger is NOT compatible with Bladez electric scooters. Click on the link below for a Bladez compatible 24 Volt 1.5 Amp Battery Charger:

Bladez 24 Volt 1.5 Amp Coaxial Battery Charger

⚠ WARNING California Residents: Proposition 65 Warning

Input: AC 80-240V, 50/60 Hz
Output: 24 VDC, 2.0A max
Equal Charging Voltage: 29.5 +/- 0.2V
Floating Charge Voltage: 27.5 +/- 0.2V
Polarity: Inside = Positive, Outside = Negative Connector:
5.5mm Outside Diameter
2.1mm Inside Diameter