Invacare | SKU:
Q76-8615
Keypad for the SPJ+ Joystick Controller with Accessories
$39.99
Unit price
/
Unavailable
Keypad for the SPJ+ Joystick Controller with Accessories is backordered and will ship as soon as it is back in stock.
$10 off orders $50+ with coupon code: TENOFF
Free Shipping
Free Shipping
- US domestic ship to addresses only.
- Does not include expedited shipping services.
Description
Description
If you need a new replacement keypad for the SPJ+ joystick controller with accessories, Monster Scooter Parts has what you need. Model SPJ+ joystick controller is used on several different models of Invacare power chairs.
This keypad differs from the standard Keypad for SPJ+ Joysticks in that this keypad includes buttons for two actuators (sometimes referred to as "accessories").
Please check the compatibility tab for a full list of all compatible models.
Installation Instructions:
1. Ensure the wheelchair power is turned off.
2. Pull the gray collar back and disconnect the joystick cable from the joystick.
3. Peel up and remove the existing, damaged keypad from the joystick face plate.
4. Inspect the joystick contacts, face plate, and joystick housing for corrosion and/or damage. 5. Using an alcohol prep pad, remove any adhesive from the joystick face plate.
6. Ensure no adhesive remains around the rim of the joystick face plate.
7. Gently remove any adhesive that may have collected in the lighting or contact cutouts of the joystick face plate.
8. After cleaning, set the joystick aside for ten minutes to allow all alcohol to evaporate from the joystick face plate.
9. Inspect once more for adhesive lumps or residue. If necessary, repeat steps 5-8 to clean the joystick face again if adhesive is present.
10. Remove the backing from the new keypad.
11. Align the bottom edge of the keypad with the bottom edge of the joystick face plate. Ensure the keypad is properly aligned with the joystick face plate before installing. The overlay is not repositionable.
12. Working from the bottom up, gently press the keypad completely into the joystick face plate.
13. Firmly press the keypad into the joystick face plate ensuring proper seal between the adhesive and joystick face plate.
14. Ensure the keypad is completely seated into the joystick face plate and no air pockets or ripples are present around the edge of the keypad.
15. Connect the joystick cable to the joystick.
16. Turn on wheelchair power and test the joystick functions.
17. If the joystick does not function properly, you may have a faulty joystick.
Invacare pert number: 1165093
⚠ WARNING California Residents: Proposition 65 Warning
This keypad differs from the standard Keypad for SPJ+ Joysticks in that this keypad includes buttons for two actuators (sometimes referred to as "accessories").
Please check the compatibility tab for a full list of all compatible models.
Installation Instructions:
1. Ensure the wheelchair power is turned off.
2. Pull the gray collar back and disconnect the joystick cable from the joystick.
3. Peel up and remove the existing, damaged keypad from the joystick face plate.
4. Inspect the joystick contacts, face plate, and joystick housing for corrosion and/or damage. 5. Using an alcohol prep pad, remove any adhesive from the joystick face plate.
6. Ensure no adhesive remains around the rim of the joystick face plate.
7. Gently remove any adhesive that may have collected in the lighting or contact cutouts of the joystick face plate.
8. After cleaning, set the joystick aside for ten minutes to allow all alcohol to evaporate from the joystick face plate.
9. Inspect once more for adhesive lumps or residue. If necessary, repeat steps 5-8 to clean the joystick face again if adhesive is present.
10. Remove the backing from the new keypad.
11. Align the bottom edge of the keypad with the bottom edge of the joystick face plate. Ensure the keypad is properly aligned with the joystick face plate before installing. The overlay is not repositionable.
12. Working from the bottom up, gently press the keypad completely into the joystick face plate.
13. Firmly press the keypad into the joystick face plate ensuring proper seal between the adhesive and joystick face plate.
14. Ensure the keypad is completely seated into the joystick face plate and no air pockets or ripples are present around the edge of the keypad.
15. Connect the joystick cable to the joystick.
16. Turn on wheelchair power and test the joystick functions.
17. If the joystick does not function properly, you may have a faulty joystick.
Invacare pert number: 1165093
⚠ WARNING California Residents: Proposition 65 Warning
Reviews (4)
Reviews (4)
Specifications
Specifications
Compatibility
Compatibility
- Invacare Nutron R32
- Invacare Nutron R32LX
- Invacare Nutron R50LX
- Invacare Nutron R51 / R51LX / R51LXP
- Invacare Pronto M41 with SureStep
- Invacare Pronto M50 with SureStep
- Invacare Pronto M51 with SureStep
- Invacare Pronto M61 with SureStep
- Invacare Pronto M71 with SureStep
- Invacare Pronto M91 with SureStep
- Invacare Pronto M94 with SureStep
- Invacare TDX3
- Invacare TDX4
- Invacare TDX5