Thumb Throttle with 4 Wires for Razor Scooters (E200/E200S, E300/E300S, Ground Force, Ground Force Drifter, & Dune Buggy)

Thumb throttle for the Razor E200 (versions 1-4 only), E300 (version 1 only), Ground Force Go-Kart (versions 1-12), Ground Force Drifter (Versions 1-2), and Dune Buggy (versions 1-11).

This throttle is only one of many electric scooter parts we offer for Razor scooters. Throttle has four wires. Check below for functionality of each wire. Throttle wire measures 60".

This throttle can also be used as a replacement for 3 wire thumb throttles. In a three wire application the yellow wire (battery level indicator) will not be used.

Prior to ordering, make sure your controller's four throttle wires are red, black, green, and yellow. Also measure your controller's four wire throttle connector and verify you have 4.5 - 6.0 volts between the red and black wire. If you do not read this level of voltage this throttle is not compatible OR your controller needs to be replaced.

Throttle Wire Color to Controller Wire Color (Description)

Red to Red (4.5 - 6.0 Volts Power)

Black to Black (Ground)

Green to Green or Blue (Speed Signal)

Yellow to Yellow (Optional Battery Level Indicator)

The wiring diagrams for this part can be found at the following links:

Razor Dune Buggie Wiring Diagram (Versions 1-5)

Razor Dune Buggie Wiring Diagram (Versions 6-11)

Razor E200 Wiring Diagram (Versions 1-4)

Razor E300 Wiring Diagram (Version 1)

Razor Ground Force Go Kart Wiring Diagram (Versions 1-6)

Razor Ground Force Go Kart Wiring Diagram (Versions 7-12)

Razor: W13112099043-M

⚠ WARNING California Residents: Proposition 65 Warning