Throttle Pot for the Pride Boxster, Rally, Shuttle, Victory 3, Victory 4, Victory 10, Victory XL, and Vista Scooters

Here is the throttle pot for the Pride Rally, Shuttle, and Victory scooters. In addition, it is also compatible with the Pride Boxter and Vista models. This is a 5K potentiometer (also known as a throttle pot), that mounts on the handlebar or tiller assembly that controls the forward and reverse operation of the scooter.

Note: This potentiometer is only available without the harness,. We strongly recommend soldering the wiring for a proper connection. A patient mechanic with perfect eyesight might be able to thread the wires through the connector loops and crimp them securely, however we discourage this in lieu of proper soldering.

The throttle pot is either factory equipped or retro-fit compatible with the Pride Boxster (PMV250), Rally series (SC150/SC151/SC155), Rally Shopper (SC151SHP), Pride Shuttle (SC100/SC140), Pride Victory series (SC160/SC1600/SC170/SC1700), Victory 10 (SC610/SC710), Victory XL (SC260/SC270/SC2700), and Vista (SC166) versions.

This throttle potentiometer is designed specifically for Pride mobility scooters. However, 5K potentiometers are the most commonly used throttle pots and may also be compatible with many other brands of mobility scooters. If used on models other than Pride Mobility models please check the detailed specifications to ensure the proper fit of the mounting bracket and length of the shaft.


Pride Mobility: ELEASMB1184, ELEASMB1511, ELEASMB2938, DWR9570H053

⚠ WARNING California Residents: Proposition 65 Warning

Resistance: 5000 ohms
Rotation: 90 degrees left and right (forward & reverse)
Shaft Length: 1.125"
Shaft Diameter: 0.25"
Shaft Slot: Perpendicular to mounting bracket
Shaft Material: Stainless steel
Overall Width: 2.0"
Overall Height: 2.6"
Overall Depth: 1.35"
Mounting Hole Center to Center Distance: 1.575"
Mounting Hole Diameter: 0.135"