24 Volt 600 Watt High Performance Electric Motor with 15 Tooth #25 Chain Sprocket for GT, Mongoose, & Schwinn

Note: This part has been discontinued by Currie Technologies.

Currie Technologies high performance 600W motor for GT, Mongoose, and Schwinn electric scooters. Upgrade your stock 180-500W motor with a genuine Currie high performance motor. The most powerful 24V motor offered from Currie Technologies. Dramatically increase low end torque and top end speed!

Standard three hole mounting face plate used by most high powered Currie Technologies scooters. Center to center mounting hole distances approximately 3-7/8".

COMPATIBILITY NOTE: Only compatible with scooters equipped with 3-pin controllers. The 24V 40A controller provided is a 3-pin controller, more detailed pictures available here:
Currie 24V 40A 3-Pin Controller

Alternatively, you could use this motor with any scooter if you replace the existing non 3-pin throttle with the 3-pin throttle. The 3-pin throttle can be found here:
Currie 3-Pin Throttle

Note: This scooter motor is supplied with a roller clutch sprocket. The motor as delivered with the roller clutch sprocket cannot be used mounted in reverse in a dual motor configuration. The sprocket will need to be changed. At this time this roller clutch sprocket is the only sprocket Monster Scooter Parts has available for this 600 watt electric scooter motor.



⚠ WARNING California Residents: Proposition 65 Warning

MODEL: XYD-13 Motor
TYPE: Brush
VOLTAGE: 24 Volt DC
RATED SPEED: 2600 RPM
RATED CURRENT: 36 Amp
SPROCKET: #25 Chain 15 Tooth
OUTPUT: 600 Watts
ROTATION: Clockwise
WIRE CONNECTOR LENGTH: 26-1/2"
HEIGHT: 5"
DIAMETER: 4-3/4"