24 Volt 2.0 Amp XLR Battery Charger for the Go-Go Folding Scooter (S19) with SLA Batteries

If you have a Go-Go Folding Scooter with sealed lead acid (SLA) batteries and need a replacement charger our premium quality 24 volt 2.0 amp XLR battery charger for the Go-Go Folding Scooter (S19) is suitable for use on sealed lead acid (SLA) batteries of size 7 Ah or larger that are typically used to put the power back into the Go-Go batteries. We give our Go-Go customers the option of selecting our Premium AlveyTech charger, or our "super-premium" Original charger that is the same as what you would find on a brand-new Go-Go scooter fresh from the factory.

Both of these superb battery chargers feature the correct XLR connector that plugs right into the scooter's charger port. In addition, both models sport low voltage protection, short circuit protection, automatic shut off and easy to read LED displays. And of course both chargers are Underwriters Laboratories (UL?«) Listed. Dry location use only.

Note: These chargers are only suitable for Go-Go's S19 scooters that use the 24 volt, 12 or 15 Ah Sealed Lead Acid (SLA) batteries. It is NOT recommended for use on the S19 scooters with the optional Lithium-ion (Li-ion) battery.

Short Circuit Protection - Prevents damage caused when operating in a short circuit condition for an indefinite period of time. The charger is "self-recovering" when the fault condition is removed.

Reverse Polarity Protection - Prevents damage when positive and negative polarities are connected in reverse.

Fully Automatic Operation - Safely charges and maintains a full charge. The final stage of charging is the float mode and the battery may remain connected indefinitely. In this mode, the charger maintains fully charged condition.

Designed to Prevent Over Charging - Automatically switches to Float Mode.

Complete 3-Stage Process - Bulk Charge, Absorption, Maintenance/Float.

LED Display

Lightweight - Switch mode chargers are very much lighter than linear chargers.

PLEASE NOTE: The Low Voltage Protection feature on this battery charger will not allow the charger to activate unless it is connected to a battery pack that has a minimum voltage of 16 volts. Battery packs with voltages below that level of charge cannot be recovered or recharged. This is a safety feature to prevent overheating in the event of a faulty battery. This battery charger will not output any voltage to the XLR connector until connected to a battery pack meeting this minimum voltage requirement.

Warranty Information:
Monster Scooter Parts is proud to announce a 60 day warranty on the Premium charger and a full 1 year warranty on the Original battery charger, covering defects in material and workmanship. Our full warranty policy can be viewed at the following link:

Monster Scooter Parts Warranty Policy

AlveyTech: C04-1155 (premium)
Universal Power Group (UPG): 24BC2000TU-4 (original)

⚠ WARNING California Residents: Proposition 65 Warning

Input: 110-120 VAC, 60Hz
Output: 24 VDC, 2.0A maximum