24"x1-3/8" Bicycle Inner Tube with Straight Valve

Replace your old 24"x1-3/8" bike inner tube with this great 24"x1-3/8" bicycle inner tube with a straight 32 mm Schrader valve. Inner tubes are the most commonly replaced bike parts, and these excellent inner tubes will get you rolling along. Let Monster Scooter Parts be your source for the best bicycle inner tubes with this 24"x1-3/8" bicycle inner tube with a straight Schrader valve.

Instructions for Tire and Tube Removal:
1. Deflate inner tube completely.
2. Unhook one side of tire bead.*
3. Remove inner tube starting opposite of valve.
4. Check around edge of rim and inside of tire for any sharp objects.

Instructions for Tire and Tube Mounting:
1. Slightly inflate tube.
2. Insert inner tube into tire.
3. Position tire and tube to permit insertion of valve stem in valve hole of rim.
4. Mount one side of tire on rim by hooking tire bead into rim well.*
5. Mount other side of tire by gradually moving around rim.
6. After insuring that tire bead is properly mounted on both sides of rim, inflate inner tube to the recommended pressure.

NOTE: Over or under inflating tube will result in poor handling of bicycle and damage to tire and inner tube. When inflating a bike tube, please use your best judgment. The recommended PSI for an inner tube can vary depending on elevation and air pressure, and should not be taken as absolute.



⚠ WARNING California Residents: Proposition 65 Warning