ORDER BY 5:00PM ET FOR SAME-DAY SHIPPING

FREE SHIPPING ON ORDERS OVER $99 (CLICK FOR DETAILS)

Monster Scooter Parts  |  SKU: X98-2171

196cc 6.5 Hp Engine for Manco Dingo Go-Karts

$219.99 Free Shipping

This item has a 30 day warranty. Warranty Policy

This item is not returnable. Return Policy

Free Shipping

  • US domestic ship to addresses only.
  • Does not include expedited shipping services.
Key Features
  • Note A: Our 196cc engine may not be a direct bolt-on replacement without minor modifications such as re-drilling the motor mounts so everything lines up correctly, but rest assured it can mounted without too much work.
  • Note B: The throttle mechanism on your old engine needs to be re-used and installed on this replacement engine.
  • 3/4" drive shaft
  • Includes manual pull start, air filter, carburetor, fuel tank, muffler, spark plug, & single magnet flywheel
  • Does not include charging coil
  • Replacement 196cc 6.5 Hp "Honda-clone" engine

Description

The 196cc 6.5 Hp engine for Manco Dingo go-karts is one of the most widely -- if not the widest -- used gasoline engines in the world today. Commonly known as the Honda-clone engine in reference to its initial brand, this design revolutionized the concept of small engines for both motor sports and portable utility equipment.

This go-kart engine is a direct replacement for the 6.5 Hp go-kart engine used on the Manco Dingo, EZ Rider, Intruder, and a whole host of generators, pressure sprayers, water pumps, snow blowers, and a thousand other products. Also compatible with most go-karts equipped with 6.5 Hp engines, including models from Yerf Dog and Hammerhead. See the Compatibility tab for details.

This EPA and certified mini bike and go-kart engine is a single-cylinder air-cooled engine ideal for lightweight applications, including custom projects. With Monster Scooter Parts' convenient inventory of spare and replacement parts, there is no longer any need for the home mini bike or go-kart builder to scrounge second-hand "junk engines" and go-kart parts as was all too often the case in years past.

This go-kart engine includes the manual pull start, air filter, carburetor, fuel tank, muffler, and spark plug as shown. Please refer to the Specifications tab for more detailed information. Additionally, see our category pages for specific 6.5 Honda-clone engine parts.

PLEASE NOTE:
This 6.5 Hp Honda clone engine may be compatible with many applications using engines that visually look like the detailed picture on the item page. Please ensure this engine will provide the form, fit, and function needed on your custom scooter, go-kart, or portable utility product prior to ordering.

⚠ WARNING California Residents: Proposition 65 Warning

Reviews (1)

Customer Reviews

Based on 1 review
0%
(0)
100%
(1)
0%
(0)
0%
(0)
0%
(0)
J
Jon B

My son (11) and I replaced his old motor on his manco dingo, took about 2 hours from start to finish. I would give five stars but the throall was so tighten it would not stop and my son hit the fence to stop. But great engine and a lot more power!!!!!!!!

Specifications

  • Engine Type: Single cylinder air-cooled 4-stroke
  • Displacement: 196cc
  • Rated Power: 4.85KW/3600rpm (6.5 hp)
  • Max Torque: 9.76 ft-lbs/2500 rpm
  • Ignition System: Non-contact Transistorized Ignition (TCI)
  • Start Mode: Recoil pull start
  • Fuel Tank Capacity: 4.2 liters (1.11 gallons)
  • Fuel Type: 87 octane or higher
  • Engine Oil Capacity: 0.5 liters (0.53 quarts)
  • Engine Oil Type: SAE 10W30 API: SF
  • Bore: 68 mm
  • Stroke: 154.1 mm
  • Idle Speed: 1500 rpm +/- 150 rpm
  • Spark Plug: Meiya-F7RTC, Champion-CRN9YC, NGK-BPR6ES
  • Choke: Manual
  • Fuel Shutoff: Yes
  • PTO Shaft Rotation: Counter clockwise
  • Output Shaft Diameter: 3/4 inches
  • Output Shaft Length: 2-7/16 inches
  • Shaft Type: Keyed; Non-tapered
  • Dimensions (L X W X H (inches)): 15-1/4 x 12-1/4 x 13
  • Weight: 37-1/2 lbs
  • Shipping Weight: 39 lbs
  • Meets EPA 2010 off-road engine standards

  • Compatibility