Loading...
12 Volt 2.0 Amp Maintainer 2000 Battery Trickle Charger for Scooters, ATVs, & Dirt Bikes (UPG)
$34.99
Unit price
/
Unavailable
12 Volt 2.0 Amp Maintainer 2000 Battery Trickle Charger for Scooters, ATVs, & Dirt Bikes (UPG) is backordered and will ship as soon as it is back in stock.
Pre-Black Friday Sale - Save 15% with coupon code: PBF15
Free Shipping
Free Shipping
- US domestic ship to addresses only.
- Does not include expedited shipping services.
Key Features
- 12V 2.0A trickle charger
- Includes alligator clamps & extra loop connectors with fuse
- 3 stages - fast, absorption, precision
- Short circuit protection
- Reverse polarity protection
- For deep cycle, starting, and sealed batteries
Description
Description
Use this 12 volt 2.0 amp output Maintainer 2000 battery trickle charger to charge and maintain sealed lead-acid batteries in scooters, ATVs, dirt bikes, and other power sports machines. Made by Universal Power Group (UPG) as part of their Adventure Power line, this superb battery charger
This charger comes with the quick-disconnect allagator clip connectors for ease of charging your battery that may be difficult to access. Or you can secure the wiring harness with ring connectors and fuse to your battery terminals, route the wiring harness just outside the battery compartment, and you can quick connect this trickle charger to keep your scooter, ATV, or dirt bike's battery charged-up and ready to roll.
Charging a Battery
Follow these steps to charge a battery:
1. Select the appropriate battery connector and connect it to the charger output connector.
2. Connect the DC battery connector to the battery terminal (Red to "+", Black to "-").
3. Plug the charger power cord into the charger.
4. Plug the power cord into wall outlet. If no LED is on, then check the AC input connection.
5. The LED light should be Red, indicating that the charger is charging the battery.
6. When battery is fully charged, the LED will be Green. Unplug the charger from the wall, then disconnect from the battery.
7. When charging a large battery, it may take a while for the green LED light to show or turn on.
Safety Features
1. Short-Circuit Protection - protects the charger from short-circuit damage.
2. Over Current Protection - protects the charger from over-current demand.
3. Over Voltage Protection - protects the batteries from damage.
4. Battery Polarity Reversal - protects the charger and batteries against incorrectly installed batteries.
Universal Power Group (UPG) / Adventure Power: 84037
⚠ WARNING California Residents: Proposition 65 Warning
This charger comes with the quick-disconnect allagator clip connectors for ease of charging your battery that may be difficult to access. Or you can secure the wiring harness with ring connectors and fuse to your battery terminals, route the wiring harness just outside the battery compartment, and you can quick connect this trickle charger to keep your scooter, ATV, or dirt bike's battery charged-up and ready to roll.
Charging a Battery
Follow these steps to charge a battery:
1. Select the appropriate battery connector and connect it to the charger output connector.
2. Connect the DC battery connector to the battery terminal (Red to "+", Black to "-").
3. Plug the charger power cord into the charger.
4. Plug the power cord into wall outlet. If no LED is on, then check the AC input connection.
5. The LED light should be Red, indicating that the charger is charging the battery.
6. When battery is fully charged, the LED will be Green. Unplug the charger from the wall, then disconnect from the battery.
7. When charging a large battery, it may take a while for the green LED light to show or turn on.
Safety Features
1. Short-Circuit Protection - protects the charger from short-circuit damage.
2. Over Current Protection - protects the charger from over-current demand.
3. Over Voltage Protection - protects the batteries from damage.
4. Battery Polarity Reversal - protects the charger and batteries against incorrectly installed batteries.
Universal Power Group (UPG) / Adventure Power: 84037
⚠ WARNING California Residents: Proposition 65 Warning
Reviews (0)
Reviews (0)
Specifications
Specifications
Input: 100-120 VAC, 50-60Hz
Output Current: 2.0 Amps
Battery Capacity: 5-20 Ah recommended range