ORDER BY 5:00PM ET FOR SAME-DAY SHIPPING

FREE SHIPPING ON ORDERS OVER $99 (CLICK FOR DETAILS)

Invacare  |  SKU: A29-3707  | ActiveCare: DC GLA81043  | Invacare: 1165880

4 Key Keypad for Dynamic A-Series Joystick Controllers (1165880)

$79.99

This item has a 30 day warranty. Warranty Policy

Free Shipping

  • US domestic ship to addresses only.
  • Does not include expedited shipping services.

Description

Replacement stick-on keypad for the Dynamic A-Series joystick controller used with all ActiveCare power chair models, some versions of the Invacare Pronto M41, and others.

Includes 4 keys (buttons) as follows: power, horn, rabbit, and turtle.

The Dynamic A-Series is a high quality, yet cost-effective, 50 amp integrated controller for power wheelchairs. It offers class-leading drive performance and is ideal for lightweight or folding chairs and drive only applications.

Installation Instructions:
1. Ensure the wheelchair power is turned off.
2. Pull the gray collar back and disconnect the joystick cable from the joystick.
3. Peel up and remove the existing, damaged keypad from the joystick face plate.
4. Inspect the joystick contacts, face plate, and joystick housing for corrosion and/or damage.
5. Using an alcohol prep pad, remove any adhesive from the joystick face plate.
6. Ensure no adhesive remains around the rim of the joystick face plate.
7. Gently remove any adhesive that may have collected in the lighting or contact cutouts of the joystick face plate.
8. After cleaning, set the joystick aside for ten minutes to allow all alcohol to evaporate from the joystick face plate.
9. Inspect once more for adhesive lumps or residue. If necessary, repeat steps 5-8 to clean the joystick face again if adhesive is present.
10. Remove the backing from the new keypad.
11. Align the bottom edge of the keypad with the bottom edge of the joystick face plate. Ensure the keypad is properly aligned with the joystick face plate before installing. The overlay is not repositionable.
12. Working from the bottom up, gently press the keypad completely into the joystick face plate.
13. Firmly press the keypad into the joystick face plate ensuring proper seal between the adhesive and joystick face plate.
14. Ensure the keypad is completely seated into the joystick face plate and no air pockets or ripples are present around the edge of the keypad.
15. Connect the joystick cable to the joystick.
16. Turn on wheelchair power and test the joystick functions.
17. If the joystick does not function properly, you may have a faulty joystick.



ActiveCare: DC GLA81043
Invacare: 1165880

⚠ WARNING California Residents: Proposition 65 Warning

Reviews (4)

Customer Reviews

Based on 4 reviews
100%
(4)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
T
Ted H

This keypad worked perfectly! My mother's Invacare scooter's power button was no longer working. Part arrived quickly, and it was merely a matter of peeling off the old key pad, cleaned the contacts, and installed the new key pad, and everything is working just the way it should. A great product at a great price. Thanks Monster Scooter Parts!

M
Michael K

Very fast shipping and I actually had to change my order and it still got delivered ahead of schedule!

T
Terrence S

My wife had to press increasingly harder to turn her power chair on. After I replaced the keypad it now starts at a simple light press of the on/off switch. Great result!!!

L
Lorna B

Works perfectly

Specifications

Compatibility