10x4.50-5 PVC Plastic Tire Sleeves for Drift Trikes (Set of 2)

This set of two 10x4.50-5 PVC plastic tire sleeves for drift trikes will make your slick tires even slicker and slippier. Made from hard PVC, these replacement plastic sleeves were designed to limit the amount of rear tire traction and provide your ride with a faster drift effect.

We also offer these tire sleeves as singles. Just go to 10x4.50-5 PVC Plastic Tire Sleeve if you only need one.

In addition, we offer a set of two 11x7.10-5 PVC Plastic Tire Sleeves.

Note A: If these sleeves are installed on drifting carts or scooters, then due to the wheels being subjected to additional forces other than just rolling forward, these sleeves will wear down at faster rates. The rougher the terrain, the faster the wear.

Note B: These hard PVC drift sleeves are made to fit tightly onto the tire. In order to mount easily, you should let some of the air out, then lubricate the tire with soap suds before pressing the sleeve onto the rubber. The tire goes into the end of the sleeve with the chamfered lugs. The pressing may be easier with a wood or rubber mallet. When the sleeve is in its correct position, just refill the tire with the correct air pressure. In addition, the PVC sleeve may adhere to the rubber tire better by using several strips of self-adhesive grip tape (such as used on skateboard decks) on the sleeve's inner face.

⚠ WARNING California Residents: Proposition 65 Warning

Outer diameter: 10-1/4"
Inner diameter: 9-1/4"
Width: 5-3/4"
Weight: 2 lbs. per sleeve