ELE2301737 - 24 Volt 3.5 Amp Charge360 Sealed Lead-Acid Battery Charger with Magnetic Connector for the Pride Victory Platinum (SC710PLA), Go-Go Elite Traveller 2 Platinum (S442EMS) & Elite Traveller Gen 3 Platinum (SC443EMS) - UPG 24BC3500SM-1

This is the genuine Pride Mobility OEM Charge360 battery charger, Pride part number ELE2301737, for the Pride Victory Platinum (SC710PLA), Go-Go Elite Traveller 2 Platinum (S442EMS) and Go-Go Elite Traveller Gen 3 Platinum (SC443EMS) mobility scooters. It drops straight in as a replacement for a lost or failed charger, or as a second charger to keep at work, at a vacation home, or in the car.

This is the 3.5 Amp version of the Charge360, the standard charging rate Pride supplies with most of its mobility scooters, so it is a like-for-like replacement for the charger most owners already have. If you have upgraded your Victory Platinum to the larger 50Ah batteries, look at the 5 Amp Charge360 (Pride ELE2301732) instead. The extra amperage fills a bigger pack in noticeably less time.

Red Connector for Sealed Lead-Acid — Not Interchangeable with the Green Lithium Charger

Pride builds the Charge360 line in two versions, and they are color-coded so you can tell them apart at a glance:

• Red label and red magnetic connector – sealed lead-acid (SLA). That is this charger.
• Green label and green magnetic connector – lithium-ion. Used on Pride models fitted with lithium battery packs.

The two are not interchangeable. Lead-acid and lithium packs require completely different charging profiles, so the red SLA charger must not be used on a lithium-equipped scooter, and the green lithium charger must not be used on an SLA scooter. If your scooter came with a green charger and a green charging port, this is not the correct replacement — you need the lithium Charge360 unit instead. Match the color before you plug in.

Charging uses the Pride® Exclusive Magnetic Connector by Aces Electronics. The magnetic plug auto-aligns and lights up the moment it seats correctly, so you can start a charge one-handed from almost any angle — a real difference for anyone with limited hand strength or dexterity who has struggled to line up a pin in a recessed port. If the cord gets bumped or snagged, the plug releases instead of dragging the charger off the table.

Inside is an advanced 3-stage switch mode circuit: bulk charge, absorption, then maintenance/float. Once the pack is full the charger drops into float automatically and holds it there, so it can stay connected indefinitely without overcharging. Short circuit, reverse polarity, and low voltage protection are all built in, and two LED indicators show charging progress and fault status at a glance. The switch mode design also keeps it far lighter than an old linear-style charger, which matters if you travel with it.

This charger is manufactured by UPG (Universal Power Group) and also carries their model number, 24BC3500SM-1, a 24 Volt 3.5 Amp magnetic sealed lead-acid charger.

Before you order: this charger is for 24 Volt sealed lead-acid batteries only and uses the red Pride magnetic charging port. It will not work with a 3-pin XLR charging port or with a green lithium charging port. If you are unsure which your scooter has, check the charging inlet on the scooter or give us a call and we'll help you confirm.

Pride Mobility Part Number: ELE2301737

• Pride MPN: ELE2301737
• UPG Model: 24BC3500SM-1
• Product Line: Pride Charge360
• Output Voltage: 24 Volt
• Output Current: 3.5 Amp
• Battery Type: Sealed Lead-Acid (SLA)
• Connector: Red Magnetic - Pride Exclusive Magnetic Connector by Aces Electronics
• Manufacturer: UPG (Universal Power Group)
• Fits: Pride Victory Platinum (SC710PLA), Go-Go Elite Traveller 2 Platinum (S442EMS)