ZK3700-HC - AutoDrive 3.0 5-Pin Lift Chair Remote Hand Control for the Golden Power Recliners PR535-MXW, PR535-LXW, & PR535-M26

If the AutoDrive 3.0 control on your Golden MaxiComforter has gone unresponsive, lost its backlight, or has buttons that no longer click, this is the genuine ZK3700-HC replacement.

The ZK3700-HC is the 11-button control for Golden's Dual Motor Sync System, used on the heavy-duty, extra-wide MaxiComforter models. AutoDrive 3.0 drives the chair to pre-programmed Zero Gravity, TV and Sleep positions, and lets you set and save a position of your own. The buttons are backlit, dim automatically when idle, and click audibly on press. Partial and full lockout options keep settings from being changed by accident. There is no on/off switch on the control.

Before you order, check the back of your hand control. The ZK3700-HC looks almost identical to the ZKAD-6. Under the scan bar on the back, the ZK3700 is marked 3700 and illuminates GREEN; the ZKAD-6 illuminates BLUE. If yours lights up blue, you need the ZKAD-6 instead.

This control fits the Golden MaxiComforter PR535-MXW, PR535-LXW (also sold as PR535-M28) and PR535-M26 only, and has a 5-pin male connector.

Make sure it's the control and not the chair. First confirm the chair is plugged into a working outlet and the light on the power supply behind the chair is on. If the chair only works when you wiggle the cord near the control, the control is the problem and this replacement should fix it. If the control has power but only one part of the chair won't move (just the legrest, for example), the problem is more likely a motor or control box.

Installation is plug-and-play with no programming needed. Unplug the chair from the wall, unplug the old control from the port on the chair, plug the new one in, then plug the chair back in. No tools required.

Not sure which one you have? Call us at 800-798-0325 with your chair's model number and we'll confirm it before you buy.

Golden Technologies: ZK3700-HC