24 Volt 2.0 Amp 24BC2000T-4 Battery Charger (S31055)

Our premium quality 24 volt 2.0 amp XLR connector battery charger is suitable for use on sealed lead acid (SLA) batteries with a capacity size of 7 Ah or larger. Typical applications include electric scooters equipped with an off-board charging female XLR socket. Comes with 3-prong adapter plug.

PLEASE NOTE: The Low Voltage Protection feature on this battery charger will not allow the charger to activate unless it is connected to a battery pack that has a minimum voltage of 16 volts. Battery packs with voltages below that level of charge cannot be recovered or recharged. This is a safety feature to prevent overheating in the event of a faulty battery. This battery charger will not output any voltage to the XLR connector until connected to a battery pack meeting this minimum voltage requirement.

This charger features an automatic shut off when battery charging is complete. Your charging time may vary with level of battery depletion. Underwriters Laboratories (UL®) Listed. Dry location use only.

Short Circuit Protection - Prevents damage caused when operating in a short circuit condition for an indefinite period of time. The charger is "self-recovering" when the fault condition is removed.

Reverse Polarity Protection - Prevents damage when positive and negative polarities are connected in reverse.

Fully Automatic Operation - Safely charges and maintains a full charge. the final stage of charging is the float mode and the battery may remain connected indefinitely. In this mode, the charger maintains fully charged condition.

Designed to Prevent Over Charging - Automatically switches to Float Mode.

Complete 3-Stage Process - Bulk Charge, Absorption, Maintenance/Float.

Low Voltage Protection - When the battery voltage is below a preset value, the charger will not start charging.

LED Display

Lightweight - Switch mode chargers are much lighter than linear chargers.

LED lights indicate battery charge level as follows:
A. POWER LED (dual color):

Red - Power On

Green - Charging Battery

B. CHARGING LED (Red):

LED on - Fast Charge

LED off - Float Charge

Warranty Information:
Monster Scooter Parts is proud to announce a full 1 year warranty on this battery charger, covering defects in material and workmanship for a period of 1 year (12 months) from the date of receipt. Our full warranty policy can be viewed at the following link:

Monster Scooter Parts Warranty Policy

UPG Model: 24BC2000T-1


⚠ WARNING California Residents: Proposition 65 Warning

UPG Model: 24BC2000T-1
Input: 110-240 VAC, 50 - 60Hz
Output: 24 VDC, 2.0A maximum

Underwriters Laboratories (UL®) Listed. Dry location use only.