Save up to 10% on every order!

$5 Off Orders $50+ (coupon code: FIVE)

$10 Off Orders $100+ (coupon code: TEN)

FREE SHIPPING ON ORDERS OVER $99 (CLICK FOR DETAILS)

Monster Scooter Parts  |  SKU: S73-8094  | Pride Mobility: RECPART1129  | Golden Technologies: MBZ00058  | Merits: P77909  | Shoprider: P77909

Keypad for 4 Key VR2 Joystick Controller

$22.99

  • Save $5 on orders $50+ with coupon code: FIVE
  • Save $10 on orders $100+ with coupon code: TEN
  • This item has a 30 day warranty. Warranty Policy

    Free Shipping

    • US domestic ship to addresses only.
    • Does not include expedited shipping services.
    Key Features
    • Easy peel-and-stick replacement!
    • Fixes common joystick problems
    • Horn key
    • On/Off key
    • Speed/profile decrease key
    • Speed/profile increase key
    • Compatible with many different power chair brands

    Description

    Do you need a replacement keypad for the 2- key VR2 joystick controller? If you do, then we have the peel & stick keypad that your joystick requires.

    This keypad is one of our best selling parts for mobility power chairs. If you use your chair daily you already know that the keypad is an easily replaced item. If your old keypad is worn beyond hope, then don't buy another joystick, just pop a new keypad on it and get mobile again.

    Installation Instructions:
    1. Ensure the wheelchair power is turned off.
    2. Pull the gray collar back and disconnect the joystick cable from the joystick.
    3. Peel up and remove the existing, damaged keypad from the joystick face plate.
    4. Inspect the joystick contacts, face plate, and joystick housing for corrosion and/or damage.
    5. Using an alcohol prep pad, remove any adhesive from the joystick face plate.
    6. Ensure no adhesive remains around the rim of the joystick face plate.
    7. Gently remove any adhesive that may have collected in the lighting or contact cutouts of the joystick face plate.
    8. After cleaning, set the joystick aside for ten minutes to allow all alcohol to evaporate from the joystick face plate.
    9. Inspect once more for adhesive lumps or residue. If necessary, repeat steps 5-8 to clean the joystick face again if adhesive is present.
    10. Remove the backing from the new keypad.
    11. Align the bottom edge of the keypad with the bottom edge of the joystick face plate. Ensure the keypad is properly aligned with the joystick face plate before installing. The overlay is not repositionable.
    12. Working from the bottom up, gently press the keypad completely into the joystick face plate.
    13. Firmly press the keypad into the joystick face plate ensuring proper seal between the adhesive and joystick face plate.
    14. Ensure the keypad is completely seated into the joystick face plate and no air pockets or ripples are present around the edge of the keypad.
    15. Connect the joystick cable to the joystick.
    16. Turn on wheelchair power and test the joystick functions.
    17. If the joystick does not function properly, you may have a faulty joystick.



    Pride Mobility: RECPART1129
    Golden Technologies: MBZ00058
    Merits: P77909
    Shoprider: P77909

    ⚠ WARNING California Residents: Proposition 65 Warning

    Reviews (10)

    Customer Reviews

    Based on 10 reviews
    100%
    (10)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    J
    Jacek Lojek

    very good product and price Thanks 👍

    S
    Shawna B

    Chet works wonderfully now that the pads changed!

    R
    RICHARD

    Great Thanks!

    W
    William R

    It fit like a glove

    L
    Leonard L

    the product is excellent but your prices and products are to expensive .

    Specifications

    Compatibility