1
of
3
Loading...
Drive Medical | SKU:
X98-3096-001
PC Board for ActiveCare Osprey 4410, Pilot 2310, Pilot 2410, Prowler 3310, & Prowler 3410 Scooters
$186.99
Unit price
/
Unavailable
PC Board for ActiveCare Osprey 4410, Pilot 2310, Pilot 2410, Prowler 3310, & Prowler 3410 Scooters - 8-Pin (Gen1) is backordered and will ship as soon as it is back in stock.
This item is not returnable. Return Policy
Free Shipping
Free Shipping
- US domestic ship to addresses only.
- Does not include expedited shipping services.
PC Board for ActiveCare Osprey 4410, Pilot 2310, Pilot 2410, Prowle...
From
$115.49
Unit price
/
Unavailable
Key Features
- Three versions available for ActiveCare scooters
- Select version based on the translucent power connector located on the bottom middle of PC board
- Gen1 board has a 8-pin connector (two rows of four pins)
- Gen2 board has a 16-pin connector (two rows of eight pins) plus speed dial
- Gen3 board has a 16-pin connector (two rows of eight pins) without the speed dial
Description
Description
A replacement PC board for ActiveCare Osprey 4410, Pilot 2310, Pilot 2410, Prowler 3310, & Prowler 3410 scooters may be the solution to your scooter's electronics issues. Short for "Printed Circuit" board, the PC is similar in function toh the scooters control module.
The Pilot/Osprey/Prowler PC board has three versions, what ActiveCare calls Gen1, Gen2, and Gen3 PC boards. The board needed for your scooter can be determined by looking at the large translucent connector located on the bottom middle of the PC board, as shown in our images. The Gen1 board has a 8-pin connector (two rows of four pins), while the Gen2 board has a 16-pin connector (two rows of eight pins) along with an included speed dial . The Gen3 is the same PC board as the Gen2 but without the speed dial.
In addition, it should be noted that the ARIO horn module is located on the board itself with Gen2 and Gen3 models (top left), while the horn module is located off the board on Gen1 models.
Please check the Compatibility for a list of known compatible models.
Note: You can also order the Speed Dial Assembly for ActiveCare Osprey, Pilot 2310, Pilot 2410, & Prowler 3410 (Version 3 PC Board) by itself if you need it
⚠ WARNING California Residents: Proposition 65 Warning
The Pilot/Osprey/Prowler PC board has three versions, what ActiveCare calls Gen1, Gen2, and Gen3 PC boards. The board needed for your scooter can be determined by looking at the large translucent connector located on the bottom middle of the PC board, as shown in our images. The Gen1 board has a 8-pin connector (two rows of four pins), while the Gen2 board has a 16-pin connector (two rows of eight pins) along with an included speed dial . The Gen3 is the same PC board as the Gen2 but without the speed dial.
In addition, it should be noted that the ARIO horn module is located on the board itself with Gen2 and Gen3 models (top left), while the horn module is located off the board on Gen1 models.
Please check the Compatibility for a list of known compatible models.
Note: You can also order the Speed Dial Assembly for ActiveCare Osprey, Pilot 2310, Pilot 2410, & Prowler 3410 (Version 3 PC Board) by itself if you need it
⚠ WARNING California Residents: Proposition 65 Warning