10x4.50-5 PVC Plastic Tire Sleeve for Drift Trikes

The 10x4.50-5 PVC plastic tire sleeve for drift trikes will make your slick tires even slicker and slippier. Made from hard PVC, the replacement plastic sleeve was designed to limit the amount of rear tire traction and provide your ride with a faster drift effect.

Coleman, MotoTec, Razor, and Huffy use the 10x4.50-5 slick tire on their drift trike models and they may be found on additional brands and models as well.

Note A: If these sleeves are installed on drifting carts or scooters, then due to the wheels being subjected to additional forces other than just rolling forward, these sleeves will wear down at faster rates. The rougher the terrain, the faster the wear.

Note B: These hard PVC drift sleeves are made to fit tightly onto the tire. In order to mount easily, you should let some of the air out, then lubricate the tire with soap suds before pressing the sleeve onto the rubber. The tire goes into the end of the sleeve with the chamfered lugs. The pressing may be easier with a wood or rubber mallet. When the sleeve is in its correct position, just refill the tire with the correct air pressure. In addition, the PVC sleeve may adhere to the rubber tire better by using several strips of self-adhesive grip tape (such as used on skateboard decks) on the sleeve's inner face.

In addition, we offer a set of two 10x4.50-5 PVC Plastic Tire Sleeves.

⚠ WARNING California Residents: Proposition 65 Warning

Outer diameter: 10-1/4"
Inner diameter: 9-1/4"
Width: 5-3/4"